Building Envelope

Course

Learning Units: 1.0 AIA LU/HSW

Edge of Perfection: Designing High-Performance Façades

This course describes the multiple challenges in designing high performance fenestration systems for building envelopes meeting architectural design needs to deliver energy performance, sufficient glazed area for optimized daylight admission and v
Course

Learning Units: 1.0 AIA LU/HSW

Storefront Rehabilitation and Design

Rehabilitation and design of storefront systems demands consideration of many factors, from thermal performance and operability to historic landmark sensitivity and appearance.
Case Study

Case Study: O.S.T. Trucking

When evaluating the roofing options available for an ambitious 2016 overhaul of their 68,000 square-foot warehouse, which featured an aged standing seam metal roofing system, the owners of O.S.T. Trucking called upon Moser Roofing Solutions.
White Paper

Metal Roofing Performance and Wind Events

Recent hurricanes such as Harvey, Irma and Maria, as well as other severe weather events, have highlighted the importance of structural integrity and performance of building materials. 
White Paper

Vitro Architectural Glass Catalog

The NEW Vitro Architectural Glass (formerly PPG glass) catalog is a comprehensive resource that can help you choose the best Vitro Glass product for your next project.
Course

Learning Units: 1.0 AIA LU/HSW

Understanding Low-E Coatings

Understanding Low-E Coatings provides an introduction to how high-performance architectural glass can significantly improve the energy efficiency of buildings while reducing their operating costs and carbon emissions.
Course

For the reconstruction of a high school in the United Kingdom, the project team removed concrete spandrel panels and installed a new steel structure for added floor area and a unitized curtain wall of translucent fiber-reinforced polymer. This pumped more daylight into classrooms without unwanted gains to heating and cooling loads. Photo courtesy of Kalwall

Learning Units: 1.0 AIA LU/HSW

Sandwich Cladding Primer

Sandwich claddings consist of a panel or shell made of two durable, resilient face sheets and a low-density insulating core, often with a decorative or otherwise attractive face.
Course

Learning Units: 1.0 AIA LU/HSW

Thermal Bridging Solutions

Thermal bridging is a big concern in the building industry, it has been recognized as a significant factor in building envelope heat loss.
Course

Shear cracks riddle the exterior wall of this urban parking structure.  COURTESY HOFFMANN ARCHITECTS 

Learning Units: 1.0 AIA LU/HSW

Accommodating Movement in Building Envelope Materials

We may think of the building envelope as an inanimate object, but in reality its components can be quite mobile.
Course

Learning Units: 1.0 AIA LU/HSW

Effective Waterproofing

This session discusses several aspects of concrete, including its chemistry, advantages and disadvantages, as well as ways to protect and extend its durability through waterproofing.
Course

Learning Units: 1.0 AIA LU/HSW

Designing and Building 'Active' Roofs

Many buildings these days are planning for walkable rooftops that can be occupied to some extent.
Course

At the top level of this energy-efficient building, an adhered air barrier provides the primary weather protection for a metal panel cladding system, to be installed.

Learning Units: 1.0 AIA LU/HSW

Meeting the demand for high-efficiency façades

Energy codes mandating more efficient use of buildings—and, by extension, of building enclosures—are already being adopted by many states as a logical step in the reduction of energy consumption.
Course

For the University of Michigan’s new Ross School of Business expansion, the Building Team employed terra-cotta panels, sandstone panels, and glass expanses to create a new entry sequence.

Learning Units: 1.0 AIA LU/HSW

Barriers and Screens Further the Art of Cladding

Is moisture control the absolute for building design decisions? Ask users, owners, occupants, and investors—and expect a chorus of agreement. They’ll list moisture vapor, wind-driven rain, rooftop ponding, and material corrosion as just a few of the...
Course

The energy performance of exterior walls is enhanced by continuous insulation between the siding and the framing, which may also influence the selection of a vapor retarder in the wall.

Learning Units: 1.0 AIA LU/HSW

Designing with Continuous Insulation for Thermal and Moisture Management

How to determine the amount of continuous insulation required by codes, while still retarding water vapor according to climate zone locations    
Course

Floor squeaks can be a sign of construction problems. Overcoming them and creating a quality finished project requires attention to all aspects of a floor system.

Learning Units: 1.0 AIA LU/HSW

Overcoming Structural Floor Squeaks in Wood-Framed Construction

Finished floors only perform as well as the subfloor beneath them
Course

Installing high-performance sheathing as part of a wood-framed roofing system can be an important factor in building resiliency and long-term water protection, especially in high-wind prone climate zones.

Learning Units: 1.0 AIA LU/HSW

High-Performing, Resilient, Wood-Framed Roofs

Designing for storm resistance to meet code requirements and reduce insurance costs
White Paper

ZIP System R-Sheathing for Multi-Family

Structure, insulation and weather protection — all in one panel.
Video
2:11

Introduction to ZIP System® R-sheathing insulated sheathing

Whether building to new energy codes or advanced thermal envelope design, ZIP System® R-sheathing and tape is a streamlined way to incorporate exterior continuous insulation.
Video
2:13

Owens Corning® Enclosure Solutions Overview Video

“Owens Corning® Enclosure Solutions deliver a range of options for commercial walls, roofs and below-grade foundations, all with flexible components you can select to fit the needs of your project. Watch our video to learn more.”
Case Study

Fabcon Capabilities & Finishes

Fabcon Precast practically invented structural precast wall panels back in 1971. Since then we've reinvented them at least twice.
Overlay Init